The SM06 Pneumatic Bump Test Machine replaces the traditional mechanical cam-type crash bench and is suitable for repeated impacts on electronic components, equipment and other electrical and electronic products during transportation or working.
Features:
-
Fully pneumatic driven, clean and environmentally friendly, good repeatability and high reliability.
-
Control the frequency of collisions by adjusting the gas pressure to achieve continuous high-frequency collisions.
-
Test time and collision frequency can be set arbitrarily, and it will stop automatically after the test is completed
-
The controller has door protection, overspeed protection and zero signal protection to ensure the safety of the system.
-
The drop height is adjustable, only need input the overload value; adaptive adjustment of the collision process to ensure the repeatability.
| Model Parameters |
SM06－50 | SM06－100 | SM06－200 | SM06－500 | SM06－1000 | SM06－1500 | SM06－2000 |
| Load (kg) | 50 | 100 | 200 | 500 | 1000 | 1500 | 2000 |
| Table size (mm) | 500×500 | 600×600 | 800×800 | 1000×1000 | 1800×1800 | 2000×2000 | 2500×2000 |
| Shock Waveform | half sine wave | ||||||
| Peak Acceleration (g) |
3～150 | 3～100 | 3～50 | ||||
| Pulse duration (ms) |
2～30 | 3～30 | 6～30 | ||||
| Max. Frequency Times (Times/Min) | 120 | 100 | 80 | 60 | |||
| Bump Distance Adjusted Automatically (mm) |
150 | 180 | 200 | ||||
| Overall Dimension (mm) | 1050×1050 ×1300 |
1050×1050 ×1300 |
1100×1100 ×1300 |
1300×1300 ×1500 |
2000×2000 ×1850 |
2000×2000 ×1850 |
2500×2000 ×1950 |
| Weight (kg) | 1500 | 1500 | 1500 | 2500 | 7500 | 8500 | 9500 |
| Power Supply | AC220V ± 10%，50Hz，2kVA | ||||||
| Power Supply for Air Compressor | AC220V±10%, 50Hz, 3kVA or AC380V±10%, 50Hz, 5kVA | ||||||
| Air Source Conditions | Air source output pressure is no greater than 1.0Mpa. If there is no air source in the lab, air compressor needs to be configured; if there is air source in the lab, and there is a high requirement for shock frequency times, a corresponding air tank needs to be configured. | ||||||
| Working Environment | Temperature range 0 ~ 40℃; Humidity ≤ 90% (25℃), non-condense | ||||||
| Standards | MIL-STD-810F IEC68-2-27 | ||||||
Đánh giá
Chưa có đánh giá nào.