Máy đo kỹ thuật số Milli-Ohm AX-126B Adexaile ADEX

SKU:1151-20270

Model: AX-126B High Speed, AC[1kHz] Battery  MILLI OHM Meter

Built in Automatic Electromotive Force cancel [A.E.C] circuit

● Minimum resolution:10μΩ

● Maximum measurement range:199.9Ω

● Measurement signal:1kHz

● 4-terminal measurement

● Built-in Contact check

● Can be remote-controlled by GP-IB or RS-232C interface (option)

Bạn cần hỗ trợ về s.phẩm?

Call 024-6687-2330

Specifications

Measuring range and Accuracy (at23℃±5℃) [within DC±13V]

Range Measuring range Resolution Measuring current Accuracy
20mΩ 0.00mΩ~19.99mΩ 10μΩ 100mA ±(0.2%rdg+50μΩ)
±2 digit [Slow]
±3 digit [Fast]
200mΩ 0.0mΩ~199.9mΩ 100μΩ 10mA
0.000Ω~1.999Ω 1mΩ 1mA
20Ω 0.00Ω~19.99Ω 10mΩ 100μA
200Ω 0.0Ω~199.9Ω 100mΩ 10μA
Test signal 1kHz±0.1% sine wave/1V r.m.s. (max.)
Measuring method 4-terminal measurement [available to contact check]
Sampling time [Free running mode] 5 or 15 times/sec.
[Remote start mode] about 23msec./106msec.
Measuring response time
(Display of time to stabilize)
within 20msec.
Measuring terminals DC max. voltage DC±25V
Comparator set range 3½ Digit (1999) both high and low limit
Indication of comparator's comparison result LED indication LO/GO/HI and buzzer
Control signal Remote start signal
Remote hold signal
comparison output [LO/GO/HI]:open collector
contact error output [CONT-E]:open collector
end of comparison output [EOC]:open collector
Operation condition [Temp.] +5℃~+40℃  [Humidity] less than 85%
Power supply AC100V/117V/220V/240V switchable, 50/60Hz, about 50VA
Outer dimension about 250 (W) ×99 (H) ×300 (D) mm 
(excluding protruding parts such as rubber legs, etc.)
Weight about 4.3kg

Bạn cần hỗ trợ về s.phẩm?

Call 024-6687-2330

The Outline

AX-126B Battery digital m ohmmeter measures internal resistance of battery having electro motive force. Not affect for thermal electromotive force, can be measured contact resistance such as relay, switch, and connector.

It suitable for internal resistance measurement capacitor, like large capacity capacitor of electric double layer capacitor.

Contact check function is standard equipment: When measure 4 terminals, either one contact failure occurs, outputs Contact Error signal.

Cần thêm thông tin hoặc tư vấn kỹ thuật?

Nếu Quý khách cần thêm thông tin chi tiết về sản phẩm, thông số kỹ thuật, ứng dụng thực tế hoặc yêu cầu mẫu thử, đội ngũ của chúng tôi luôn sẵn sàng hỗ trợ.

📞 Điện thoại: (024) 6687 2330

📧 Email: sale@pemax-mte.com

Hoặc gửi yêu cầu qua biểu mẫu liên hệ hoặc trao đổi trực tiếp qua hộp chat ở góc phải màn hình.