Máy Phân tích cơ học động DMA analysis up to high temperatures NETZSCH
Non-destructive hot modulus: DMA analysis up to high temperatures
For ceramics, metals, alloys, glasses, composites and more
?
The DMA GABO EPLEXOR® HT line is the only instrument series on the market which is able to carry out DMA measurements with a maximum dynamic force of 500 N to 1500°C.
Two high-temperature furnaces are available: RT to 1000°C and RT to 1500°C. With a standard furnace (-160°C to 500°C) simultaneously mounted, it is possible to perform consecutive test runs in both the low- and high-temperature range. EPLEXOR® HT instruments can thus cover the entire temperature span from -160°C to 1500°C.
The electronics within the system automatically identify which furnace is currently in use.
-
Temperature range:
-160°C to 1500°C; the full temperature range can be covered if the instrument is equipped with the low-temperature and one high-temperature furnace -
Frequency range:
0.01 to 100 Hz; optional: 0.0001 Hz; 200 Hz -
Static force range:
max. 1500 N -
Dynamic force range:
from ± 25 N up to ± 500 N (depending on instrument type, see table) -
Force sensor:
interchangeable; nominal forces available from 10 N to 500 N (depending on the instrument type and configuration) -
Static displacement:
max. 60 mm -
Dynamic amplitude:
from ± 1.5 mm up to ± 6 mm (depending on the instrument type and system configuration) -
Measurement modes for applications above 500°C:
asymmetric and 3/4-point bending, compression -
Work space of the high-temperature furnaces:
cylindrical chamber, diameter: 70 mm, height: 120 mm
Cần thêm thông tin hoặc tư vấn kỹ thuật?
Nếu Quý khách cần thêm thông tin chi tiết về sản phẩm, thông số kỹ thuật, ứng dụng thực tế hoặc yêu cầu mẫu thử, đội ngũ của chúng tôi luôn sẵn sàng hỗ trợ.
📞 Điện thoại: (024) 6687 2330
📧 Email: sale@pemax-mte.com
Hoặc gửi yêu cầu qua biểu mẫu liên hệ hoặc trao đổi trực tiếp qua hộp chat ở góc phải màn hình.